Wednesday, December 31, 2014

What if: Weights and Center of Gravity

OK, finally buckled down and did the calculations for the weight and center of gravity of the camper.

I started by modifying a spreadsheet I used when working on a design for a transportable home. (A trailer-based home without the travel-trailer feel, designed to be mobile but not really conducive  to being moved every few days)

I'm a bit of a train freak so if this reminds you of an old combine car, great!
 In this case it was important to know what the weight would be in order to make sure the trailer-frame, and axles, were up to the job, and to ensure that somewhere between 9% to 15% of the overall weight would end up on the trailer tongue so the thing would tow properly.

This involves calculating the weight of each separate component as well as it's distance from the trailer tongue (The datum point) then applying a formula that looks like this; =IF(E5>$I$4,(1+((E5-$I$4)/$I$4))*D5,D5*(E5/$I$4))  to find the weight that component puts on the axle. The next step is to use those results in a second formula that subtracts the calculated axle weight from the actual weight to find out how much weight that same component adds to or subtracts from the tongue. (Anything behind the axle subtracts from the tongue weight, anything ahead of the axle adds to the tongue weight.) By then summing everything up and adjusting I4 (The location of the axles) the proper weight distribution is achieved.

One worksheet of the spreadsheet is used to record the weights of every type of material that would be used for the build,

a second worksheet is used to calculate the weight of assembled components like beds, cabinets, walls, roof, etc.

and the third worksheet is where the final calculations are done. (In this case the tongue weight was about 9.47% of the gross. Since the axle datum was based on an off-the-shelf trailer without having to modify the axle location, I called it good enough!)

Admittedly, getting the spreadsheet set up and populated with data is pretty tedious, but once done it's pretty simple to play around with things. For instance if I want to see what happens if I use 1/2" ply instead of 3/4" ply for cabinet carcasses I make the change in one spot on the materials sheet and all the rest of the calculations are automatic.

By including a costs column on the materials sheet that then feeds through to the component calculation sheet I can also come up with an estimated cost of materials. (This project, as well as the camper project, are still on the drawing board so I haven't bothered with costing them yet.)

 Finding the center of gravity of a collection of elements, such as my camper, is actually easier, in terms of formula complexity, than the trailer weights exercise.

I still need to calculate the weight and distance of each element from a datum point (Which is why modifying the previous spreadsheet makes sense.) but then all I needed was the 'moment' of each element; which is simply weight X distance.

After that it's a simple matter of summing the weights column and dividing that into the summed moments to find the Center of Gravity's distance from the datum.

You can pick any point to be the datum as long as all the elements lie to one side of it (i.e. the datum can not be somewhere in the middle of the camper.) and to make it simple I picked the outside face of the rear wall.

The good news is that the COG is almost 66.5 inches from the datum which puts it comfortably forward of the axle, (The red target in the image above.) right where it belongs.

 If I move all the water from the potable tank to the grey-water tank, which sits closer to the rear of the camper, the COG is only shifted by about 2.25 inches, still keeping it forward of the axle.

Assuming a relatively even distribution of supplies through the camper, I can easily maintain this safe COG and will have no trouble keeping the front tires on the ground where they belong and, at the same time, avoid overloading the rear axle. (Any weight taken off the front axle is added to the rear axle.)

I admit, just looking at a side view of the drawing, that doesn't seem like the right spot for the COG. There's certainly more camper behind the COG than forward of it, but the fact that some key heavy items, such as the water tank, batteries and air conditioner are all placed forward in the camper makes it work. Think of it as a teeter toter with an adult on one end and a child on the other. The balance point, or COG, moves towards the adult and away from the child.

Now for the bad news.  The camper with full water tank but no supplies weighs in at about 1450 lbs., leaving me only 450 lbs for myself and my supplies before busting the 1900 lbs payload rating of a stock F150. (Even at the penalty of weight, I prefer to build robustly so there's no thin, cheap paneling held together with staples here.) For some RV sales people that's good enough and they would claim all day long that an F150 can handle it, but I wouldn't be comfortable pushing it like that because I know from experience that weights creep up and people tend to drastically underestimate how heavy their crap really is.

By adding some upgrades to an F150 I can boost it's payload rating and maybe manage to squeak in there, but I suspect the more reasonable solution is to just bite the bullet and step up to an F250 instead.

I'm a firm believer in treating my stuff gently. For instance the van is rated to haul a 5000 lb trailer, but the thought of listening to the van's engine straining near the top of it's power range for hour after hour as it drags 5000 lbs down the road is like fingernails on chalkboard to me, so when purchasing a cargo trailer I bought one rated for 3000 lbs instead.

OK, there's one more post to go in this series. In it I'll go over a few of the variations I came up with as I worked on this project.

Thursday, December 25, 2014

The Christmas Ball, Texas style

After hours of primping
                                and fussing,

(and only a little lady-like cussing)

she was ready for the
                             Christmas Ball.

Rushing, with little time to stall,                                                     
                                        she started up the grand walkway,
where cheer poured from the doorway,                                           

                                               but before she could get there
a Texas hog came out of nowhere,                                                  
                                               all tangled up in her petticoats.

                            And just like that, that cheer turned to sour notes.
She was petrified                                                                              
But as several potential suitors vied                                                               
                                            for the privilege of setting her to rights again,
She was soon glorified                                                                          
Not wishing any of them to be denied,                                                           
                                                she gathered her wits and the games began 
as she joined the party without further pause,                                                     
                                                a gleam in her eye to rival Old Man Claus!

Wednesday, December 24, 2014

The View

No, not that daytime TV thing they used to advertize the crap out of.

I'm talking about the view out the back door of the barn on this crisp, sunny day as I roll out the gill and prepare to do a turkey breast.

The pond is about 60 yards downhill to the left so I think you can see why my stand-up 'computer desk' is the short shelf tucked in there behind the full height baker's rack. I have camera, binoculars and field guides all right there at hand as well.

I have a lot to celebrate most every day, and try not to let myself forget it.

Sunday, December 21, 2014

What If: Bits and Pieces

OK, it's been a while since I've done any What If posts but sometimes life gets in the way, and frankly, life has priority. While I continue crunching numbers in order to come up with weight and center of gravity, I thought I'd 'entertain' you with this post.

There’s a big difference between a shelter and a home.

A shelter provides protection from the environment.

A home is shelter that also provides for the needs, comfort and convenience of the occupants.

No home is perfect but some are better than others.

At this stage of the design process I start virtually living in the space. By that I mean I imagine myself going through the motions of the obvious and the mundane.
Is the bed large enough to be comfortable and will it be claustrophobic or pleasantly cozy??

Is there decent ventilation?

When I come back from a wet and dirty hike is there some place to hang my poncho and park my boots?

In this image you can see coat hooks for hanging wet and dirty stuff, storage space for a broom, towel bars on the door, and the all important fire extinguisher, all handy to the door.

Where do I put my glasses and book when I’m done reading in bed?

Here you can see storage for cutlery (Remember, no drawer.) and a towel bar for dish-towels. These are repeated over on the other counter too so objects such as the fire stick will have a permanent and handy home. Note that the towel bar is located back near the side wall/window where anything hanging on it won't be in the way
Can I turn off the reading light without getting up?

Where will I keep the broom?

Is there a handy place to store the fire stick I'm going to use many times a day to light the stove with?

And since one fire extinguisher might not be enough, or might be in the wrong place when you need it most, another one at the opposite end of the camper. These should be handy, but not in the way and I like to mount them far enough off the floor to get a broom under there so dust bunnies don't set up housekeeping. Here's a case where bigger isn't better. These things will lose their charge over time and the smaller, more economical ones are more likely to get replaced when necessary yet are still adequate for this small space.
Some of these things are addressed in the basic design, others by the details, details that may seem small but have a significant impact on the enjoyment and satisfaction of living in the space, of making it a home.

I call these details the bits and pieces and I've only touched on a few of them here, but you get the idea.